Polymerization
A single alkene molecule, called a monomer, can add to the double bond of another to give a product, called a dimer, having twice the molecular weight. In the presence of an acid catalyst, the monomer 2-methylpropene (C4H8), for example, is converted to a mixture of C8H16 alkenes (dimers) suitable for subsequent conversion to 2,2,4-trimethylpentane (isooctane).
If the process is repeated, trimers, and eventually polymers—substances composed of a great many monomer units—are obtained.
Approximately one-half of the ethylene produced each year is used to prepare the polymer polyethylene. Polyethylene is a mixture of polymer chains of different lengths, where n, the number of monomer units, is on the order of 1,000–5,000.
The distinguishing characteristic of polyethylene is its resistance to attack by most substances. Its resemblance to an alkane in this respect is not surprising, because the polymer chain is nearly void of functional groups. Its ends may have catalyst molecules attached or may terminate in a double bond by loss of a hydrogen atom at the next-to-last carbon. The properties of a particular sample of polyethylene depend mainly on the catalyst used and the conditions under which polymerization occurs. A chain may be continuous, or it may sprout occasional branches of shorter chains. The more nearly continuous the chain, the greater is the density of the polymer.
Low-density polyethylene (LDPE) is obtained under conditions of free-radical polymerization, whereby polymerization is initiated by oxygen or peroxides under high pressure at roughly 200 °C (392 °F). Polyethylene, especially low-density polyethylene, is thermoplastic (softens and flows on heating) and can be extruded into sheets or films and molded into various shapes.
High-density polyethylene (HDPE) is obtained under conditions of coordination polymerization initiated by a mixture of titanium tetrachloride (TiCl4) and triethylaluminum [(CH3CH2)3Al]. Coordination polymerization was discovered by German chemist Karl Ziegler. Ziegler and Italian chemist Giulio Natta pioneered the development of Ziegler-Natta catalysts, for which they shared the 1963 Nobel Prize for Chemistry. The original Ziegler-Natta titanium tetrachloride-triethylaluminum catalyst has been joined by a variety of others. In addition to its application in the preparation of high-density polyethylene, coordination polymerization is the method by which ethylene oligomers, called linear α-olefins, and stereoregular polymers, especially polypropylene, are prepared.
Vinyl compounds, which are substituted derivatives of ethylene, can also be polymerized according to the following reaction:
Polymerization of vinyl chloride (where X is Cl) gives polyvinyl chloride, or PVC, more than 27 million metric tons of which is used globally each year to produce pipes, floor tiles, siding for houses, gutters, and downspouts. Polymerization of styrene, X = C6H5 (a phenyl group derived from benzene; see below Aromatic hydrocarbons), yields polystyrene, a durable polymer used to make luggage, refrigerator casings, and television cabinets and which can be foamed and used as a lightweight packaging and insulating material. If X = CH3, the product is polypropylene, which is used to make films, molded articles, and fibres. Acrylonitrile, X = CN, gives polyacrylonitrile for use in carpet fibres and clothing.
Diene polymers have an important application as rubber substitutes. Natural rubber (see above Natural occurrence) is a polymer of 2-methyl-1,3-butadiene (commonly called isoprene). Coordination polymerization conditions have been developed that convert isoprene to a polymer with properties identical to that of natural rubber.
The largest portion of the synthetic rubber industry centres on styrene-butadiene rubber (SBR), which is a copolymer of styrene and 1,3-butadiene. Its major application is in automobile tires.
Alkyne polymerization is not nearly as developed nor as useful a procedure as alkene polymerization. The dimer of acetylene, vinylacetylene, is the starting material for the preparation of 2-chloro-1,3-butadiene, which in turn is polymerized to give the elastomer neoprene. Neoprene was the first commercially successful rubber substitute.
Aromatic hydrocarbons
Benzene (C6H6), the simplest aromatic hydrocarbon, was first isolated in 1825 by English chemist Michael Faraday from the oily residues left from illuminating gas. In 1834 it was prepared from benzoic acid (C6H5CO2H), a compound obtained by chemical degradation of gum benzoin, the fragrant balsam exuded by a tree that grows on the island of Java, Indonesia. Similarly, the hydrocarbon toluene (C6H5CH3) received its name from tolu balsam, a substance isolated from a Central American tree and used in perfumery. Thus benzene, toluene, and related hydrocarbons, while not particularly pleasant-smelling themselves, were classified as aromatic because they were obtained from fragrant substances. Joseph Loschmidt, an Austrian chemist, recognized in 1861 that most aromatic substances have formulas that can be derived from benzene by replacing one or more hydrogens by other atoms or groups. The term aromatic thus came to mean any compound structurally derived from benzene. Use of the term expanded with time to include properties, especially that of special stability, and eventually aromaticity came to be defined in terms of stability alone. The modern definition states that a compound is aromatic if it is significantly more stable than would be predicted on the basis of the most stable Lewis structural formula written for it. (This special stability is related to the number of electrons contained in a cyclic conjugated system; see below Arenes: Structure and bonding.) All compounds that contain a benzene ring possess special stability and are classified as benzenoid aromatic compounds. Certain other compounds lack a benzene ring yet satisfy the criterion of special stability and are classified as nonbenzenoid aromatic compounds.
Arenes
These compounds are hydrocarbons that contain a benzene ring as a structural unit. In addition to benzene, other examples include toluene and naphthalene.
(Hydrogen atoms connected to the benzene ring are shown for completeness in the above structural formulas. The more usual custom, which will be followed hereafter, omits them.)