PVC

PVC, a synthetic resin made from the polymerization of vinyl chloride. Second only to polyethylene among the plastics in production and consumption, PVC is used in an enormous range of domestic and industrial products, from raincoats and shower curtains to window frames and indoor plumbing. A lightweight, rigid plastic in its pure form, it is also manufactured in a flexible “plasticized” form.

Vinyl chloride (CH₂=CHCl), also known as chloroethylene, is most often obtained by reacting ethylene with oxygen and hydrogen chloride over a copper catalyst. It is a toxic and carcinogenic gas that is handled under special protective procedures. PVC is made by subjecting vinyl chloride to highly reactive compounds known as free-radical initiators. Under the action of the initiators, the double bond in the vinyl chloride monomers (single-unit molecules) is opened, and one of the resultant single bonds is used to link together thousands of vinyl chloride monomers to form the repeating units of polymers (large, multiple-unit molecules). The chemical structure of the vinyl chloride repeating units is:

More From Britannica

major industrial polymers: Polyvinyl chloride (PVC)

PVC was prepared by the French chemist Henri Victor Regnault in 1835 and then by the German chemist Eugen Baumann in 1872, but it was not patented until 1912, when another German chemist, Friedrich Heinrich August Klatte, used sunlight to initiate the polymerization of vinyl chloride. Commercial application of the plastic was at first limited by its extreme rigidity; however, in 1926, while trying to dehydrohalogenate PVC in a high-boiling solvent in order to obtain an unsaturated polymer that might bond rubber to metal, Waldo Lunsbury Semon, working for the B.F. Goodrich Company in the United States, produced what is now called plasticized PVC. The discovery of this flexible, inert product was responsible for the commercial success of the polymer. Under the trademark Koroseal, Goodrich made the plastic into shock-absorber seals, electric-wire insulation, and coated cloth products. One of the best-known applications of the plastic was initiated in 1930, when the Union Carbide and Carbon Corporation (later the Union Carbide Corporation) introduced Vinylite, a copolymer of vinyl chloride and vinyl acetate that became the standard material of long-playing phonograph records.

Pure PVC finds application in the construction trades, where its rigidity, strength, and flame resistance are useful in pipes, conduits, siding, window frames, and door frames. It is also blow-molded into clear, transparent bottles. Because of its rigidity, it must be extruded or molded above 100 °C (212 °F)—a temperature high enough to initiate chemical decomposition (in particular, the emission of hydrogen chloride [HCl]). Decomposition can be reduced by the addition of stabilizers, which are mainly compounds of metals such as cadmium, zinc, tin, or lead.

In order to arrive at a product that remains flexible, especially at low temperatures, most PVC is heated and mixed with plasticizers, which are sometimes added in concentrations as high as 50 percent. The most commonly used plasticizer is the compound di-2-ethylhexyl phthalate (DEHP), also known as dioctyl phthalate (DOP). Plasticized PVC is familiar to consumers as floor tile, garden hose, imitation leather upholstery, and shower curtains.

Very fine particles of PVC can be dispersed in plasticizer in excess of the amount used to make plasticized PVC (e.g., 50 percent or more), and this suspension can be heated until the polymer particles dissolve. The resultant fluid, called a plastisol, will remain liquid even after cooling but will solidify into a gel upon reheating. Plastisols can be made into products by being spread on fabric or cast into molds. Flexible gloves can be made by dipping a hand-shaped form into plastisol, and hollow objects such as overshoes can be made by casting plastisol into a mold, pouring off the excess, and solidifying the material remaining on the walls of the mold.

PVC has been an occasional object of controversy since a link between vinyl chloride monomer and cancer was established in 1973. Environmentalists and health advocates raised concerns over the possible ill effects of exposure to substances such as residual vinyl chloride monomer, hydrogen chloride, organometallic stabilizers, and phthalate plasticizers. Industry officials maintain that these substances are scrupulously controlled and are released from PVC in trace amounts that have not been proved harmful.

Rigid PVC is typically made into durable structural products such as window casings and home siding, which are not frequently recycled. PVC bottles and containers, however, can be recycled into products such as drainage pipe and traffic cones. The recycling code number of PVC is #3.