Ferrous metals

Ferrous products (i.e., iron and steel) can be recycled by both internal and external methods. Some internal recycling methods are obvious. Metal cuttings or imperfect products are recycled by remelting, recasting, and redrawing entirely within the steel mill. The process is much cheaper than producing new metal from the basic ore. Most iron and steel manufacturers produce their own coke. By-products from the coke oven include many organic compounds, hydrogen sulfide, and ammonia. The organic compounds are purified and sold. The ammonia is sold as an aqueous solution or combined with sulfuric acid to form ammonium sulfate, which is subsequently dried and sold as fertilizer.

In the ferrous metals industry there are also many applications of external recycling. Scrap steel makes up a significant percentage of the feed to electric arc and basic oxygen furnaces. The scrap comes from a variety of manufacturing operations that use steel as a basic material and from discarded or obsolete goods made from iron and steel. One of the largest sources of scrap steel is the reprocessing of old automobile bodies.

Salvage operations on automobiles actually begin before they reach the reprocessor. Parts such as transmissions and electrical components can be rebuilt and resold, and the engine block is removed and melted down for recasting. After being crushed and flattened, the automobile body is shredded into small pieces by hammer mills. Ferrous metals are separated from the shredder residue by powerful magnets, while other materials are sorted out by hand or by jets of air. Only the plastics, textiles, and rubber from the residue are not reused. The same basic recovery procedures apply to washing machines, refrigerators, and other large, bulky steel or iron items. Lighter items such as steel cans are also recycled in large numbers.

Nonferrous metals

At present, manual sorting seems to be the only practical method of separating pieces of nonferrous scrap materials such as aluminum, copper, and lead.

Secondary aluminum reprocessing is a large industry, involving the recycling of machine turnings, rejected castings, siding, and even aluminum covered with decorative plastic. The items are thrown into a reverberatory furnace (in which heat is radiated from the roof into the material treated) and melted while the impurities are burned off. The resulting material is cast into ingots and resold for drawing or forming operations. Beverage cans are another major source of recycled aluminum; in some countries, as many as two-thirds of all such cans are recycled.

The primary source of used lead is discarded electric storage batteries. Battery plates may be smelted to produce antimonial lead (a lead-antimony alloy) for manufacture of new batteries or to produce pure lead and antimony as separate products.

Rubber

Though much used rubber was formerly burned, this practice has been greatly curtailed in most countries in order to prevent air pollution. Internal recycling is common in most rubber plants; the reprocessed product can be used wherever premium-grade rubber is not needed. External recycling has proved a problem over the years, as the cost of recycling old or worn-out tires has far exceeded the value of the reclaimed material. Shredded rubber can be used as an additive in asphalt pavements, and discarded tires may be used as components of swings and other assorted recreational climbing equipment in “tire playgrounds” for children.

Paper and other cellulose products

One of the most readily available materials for recycling is paper, which alone accounts for more than one-third by weight of all the material deposited in landfills in the United States. The stream of wastepaper consists principally of newspaper; office, copying, and writing paper; computer paper; coloured paper; paper tissues and towels; boxboard (used for cereal and other small boxes); corrugated cardboard; and kraft paper (used for paper bags). These papers must usually be sorted before recycling. Newsprint and cardboard can be repulped to make the same materials, while other types of scrap paper are recycled for use in low-quality papers such as boxboard, tissues, and towels. Paper intended for printing-grade products must be de-inked (often using caustic soda) after pulping; for some uses the stock is bleached before pressing into sheets. Smaller amounts of recycled paper are made into cellulose insulation and other building products.

Bark, wood chips, and lignin from sawmills, pulp mills, and paper mills are returned to the soil as fertilizers and soil conditioners. The kraft process of papermaking produces a variety of liquid wastes that are sources of such valuable chemicals as turpentine, methyl alcohol, dimethyl sulfide, ethyl alcohol, and acetone. Sludges from pulp and paper manufacture and phosphate slime from fertilizer manufacture can be made into wallboard.

Glass

Glass makes up about 6 percent by weight of the material in municipal waste streams. Glass is an easily salvageable material but one that is difficult to recover economically. Though enormous numbers of glass containers are used throughout the world, much of this glass is still not recycled, because the raw materials are so inexpensive that there is scant economic motive to reuse them. Even those glass containers that are returned by consumers in their original form sooner or later become damaged or broken.

One problem in recycling glass is separating it from other refuse. Another problem is that waste glass must be separated by colour (i.e., clear, green, and brown) before it can be reused to make new glass containers. Despite these difficulties, anywhere from 35 to 90 percent of cullet (broken or refuse glass) is currently used in new-glass production, depending on the country.