transistor summary

Written and fact-checked by The Editors of Encyclopaedia Britannica

Below is the article summary. For the full article, see transistor.

A transistor is a sandwich of dissimilar semiconductors to which are attached three electrodes. Because of the unique electrical properties that occur at p-n junctions, current between two of the electrodes may be turned on or off like a switch by varying the voltage applied to the third electrode. In the metal-oxide semiconductor field-effect transistor (MOSFET) shown, current flows between the source and drain electrodes and is regulated by the gate electrode. The n-type semiconductor regions have an excess of electrons, but are separated from each other by the p-type region, which has an excess of positive charge, called “holes.” If a positive voltage is applied to the gate (top), electrons in the p-region will be attracted to the area under the oxide, forming a channel of negative charge between the source and drain. If a positive voltage is then applied to the drain, a current of electrons flows through the device and the transistor is on. If the gate voltage is removed (bottom), the electron channel is broken and the transistor is off. — A transistor is a sandwich of dissimilar semiconductors to which are attached three electrodes. Because of the unique electrical properties that occur at *p-n* junctions, current between two of the electrodes may be turned on or off like a switch by varying the voltage applied to the third electrode. In the metal-oxide semiconductor field-effect transistor (MOSFET) shown, current flows between the source and drain electrodes and is regulated by the gate electrode. The n-type semiconductor regions have an excess of electrons, but are separated from each other by the p-type region, which has an excess of positive charge, called “holes.” If a positive voltage is applied to the gate (top), electrons in the p-region will be attracted to the area under the oxide, forming a channel of negative charge between the source and drain. If a positive voltage is then applied to the drain, a current of electrons flows through the device and the transistor is on. If the gate voltage is removed (bottom), the electron channel is broken and the transistor is off.

transistor, Solid-state semiconductor device for amplifying, controlling, and generating electrical signals. Invented at Bell Labs (1947) by John Bardeen, Walter H. Brattain, and William B. Shockley, it displaced the vacuum tube in many applications. Transistors consist of layers of different semiconductors produced by addition of impurities (such as arsenic or boron) to silicon. These impurities affect the way electric current moves through the silicon. Transistors were pivotal in the advancement of electronics because of their small size, low power requirements, low heat generation, modest cost, reliability, and speed of operation. Single transistors were superseded in the 1960s and ’70s by integrated circuits; present-day computer chips contain billions of transistors. Today transistors perform many different functions in nearly every type of electronic equipment.

Texas Instruments Incorporated Summary

Texas Instruments Incorporated (TI), American manufacturer of calculators, microprocessors, and digital signal processors with its headquarters in Dallas, Texas. The direct antecedent to the company was founded May 16, 1930, by John Clarence (“Doc”) Karcher and Eugene McDermott to provide

Jack Kilby Summary

Jack Kilby American engineer and one of the inventors of the integrated circuit, a system of interconnected transistors on a single microchip. In 2000 Kilby was a corecipient, with Herbert Kroemer and Zhores Alferov, of the Nobel Prize for Physics. Kilby was the son of an electrical engineer and,