organic compound
Our editors will review what you’ve submitted and determine whether to revise the article.
organic compound, any of a large class of chemical compounds in which one or more atoms of carbon are covalently linked to atoms of other elements, most commonly hydrogen, oxygen, or nitrogen. The few carbon-containing compounds not classified as organic include carbides, carbonates, and cyanides.
In general, organic compounds are substances that contain carbon (C), and carbon atoms provide the key structural framework that generates the vast diversity of organic compounds. All things on Earth (and most likely elsewhere in the universe) that can be described as living have a crucial dependence on organic compounds. Foodstuffs—namely, fats, proteins, and carbohydrates—are organic compounds, as are such vital substances as hemoglobin, chlorophyll, enzymes, hormones, and vitamins. Other materials that add to the comfort, health, or convenience of humans are composed of organic compounds, including clothing made of cotton, wool, silk, and synthetic fibres; common fuels, such as wood, coal, petroleum, and natural gas; components of protective coatings, such as varnishes, paints, lacquers, and enamels; antibiotics and synthetic drugs; natural and synthetic rubber; dyes; plastics; and pesticides.
Read about the differences between organic compounds and inorganic compounds in the article chemical compound.
Historical developments
When chemistry took on many of the characteristics of a rational science at the end of the 18th century, there was general agreement that experiment could reveal the laws that governed the chemistry of inanimate, inorganic compounds. The compounds that could be isolated from living organic entities, however, appeared to have compositions and properties entirely different from inorganic ones. Very few of the concepts that enabled chemists to understand and manipulate the chemistry of inorganic compounds were applicable to organic compounds. This great difference in chemical behaviour between the two classes of compounds was thought to be intimately related to their origin. Inorganic substances could be extracted from the rocks, sediments, or waters of the Earth, whereas organic substances were found only in the tissues or remains of living organisms. It was therefore suspected that organic compounds could be produced only by organisms under the guidance of a power present exclusively in living things. This power was referred to as a vital force.
This vital force was thought to be a property inherent to all organic substances and incapable of being measured or extracted by chemical operations. Thus, most chemists of the time believed that it was impossible to produce organic substances entirely from inorganic ones. By about the middle of the 19th century, however, several simple organic compounds had been produced by the reaction of purely inorganic materials, and the unique character of organic compounds was recognized as the consequence of an intricate molecular architecture rather than of an intangible vital force.
The first significant synthesis of an organic compound from inorganic materials was an accidental discovery of Friedrich Wöhler, a German chemist. Working in Berlin in 1828, Wöhler mixed two salts (silver cyanate and ammonium chloride) in an attempt to make the inorganic substance ammonium cyanate. To his complete surprise, he obtained a product that had the same molecular formula as ammonium cyanate but was instead the well-known organic compound urea. From this serendipitous result, Wöhler correctly concluded that atoms could arrange themselves into molecules in different ways, and the properties of the resulting molecules were critically dependent on the molecular architecture. (The inorganic compound ammonium cyanate is now known to be an isomer of urea; both contain the same type and number of atoms but in different structural arrangements.) Encouraged by Wöhler’s discovery, others succeeded in making simple organic compounds from inorganic ones, and by roughly 1860 it was generally recognized that a vital force was unnecessary for the synthesis and interconversion of organic compounds.
Although a large number of organic compounds have since been synthesized, the structural complexity of certain compounds continues to pose major problems for the laboratory synthesis of complicated molecules. But modern spectroscopic techniques allow chemists to determine the specific architecture of complicated organic molecules, and molecular properties can be correlated with carbon bonding patterns and characteristic structural features known as functional groups.
Carbon bonding
The carbon atom is unique among elements in its tendency to form extensive networks of covalent bonds not only with other elements but also with itself. Because of its position midway in the second horizontal row of the periodic table, carbon is neither an electropositive nor an electronegative element; it therefore is more likely to share electrons than to gain or lose them. Moreover, of all the elements in the second row, carbon has the maximum number of outer shell electrons (four) capable of forming covalent bonds. (Other elements, such as phosphorus [P] and cobalt [Co], are able to form five and six covalent bonds, respectively, with other elements, but they lack carbon’s ability to bond indefinitely with itself.) When fully bonded to other atoms, the four bonds of the carbon atom are directed to the corners of a tetrahedron and make angles of about 109.5° with each other. The result is that not only can carbon atoms combine with one another indefinitely to give compounds of extremely high molecular weight, but the molecules formed can exist in an infinite variety of three-dimensional structures. The possibilities for diversity are increased by the presence of atoms other than carbon in organic compounds, especially hydrogen (H), oxygen (O), nitrogen (N), halogens (fluorine [F], chlorine [Cl], bromine [Br], and iodine [I]), and sulfur (S). It is the enormous potential for variation in chemical properties that has made organic compounds essential to life on Earth.
The structures of organic compounds commonly are represented by simplified structural formulas, which show not only the kinds and numbers of atoms present in the molecule but also the way in which the atoms are linked by the covalent bonds—information that is not given by simple molecular formulas, which specify only the number and type of atoms contained in a molecule. (With most inorganic compounds, the use of structural formulas is not necessary, because only a few atoms are involved and only a single arrangement of the atoms is possible.) In the structural formulas of organic compounds, short lines are used to represent the covalent bonds. Atoms of the individual elements are represented by their chemical symbols, as in molecular formulas.
Structural formulas vary widely in the amount of three-dimensional information they convey, and the type of structural formula used for any one molecule depends on the nature of the information the formula is meant to display. The different levels of sophistication can be illustrated by considering some of the least complex organic compounds, the hydrocarbons. The gas ethane, for example, has the molecular formula C2H6. The simplest structural formula, drawn either in a condensed or in an expanded version, reveals that ethane consists of two carbon atoms bonded to one another, each carbon atom bearing three hydrogen atoms. Such a two-dimensional representation correctly shows the bonding arrangement in ethane, but it does not convey any information about its three-dimensional architecture. A more sophisticated structural formula can be drawn to better represent the three-dimensional structure of the molecule. Such a structural formula correctly shows the tetrahedral orientation of the four atoms (one carbon and three hydrogens) bonded to each carbon, and the specific architecture of the molecule.
Larger organic molecules are formed by the addition of more carbon atoms. Butane, for example, is a gaseous hydrocarbon with the molecular formula C4H10, and it exists as a chain of four carbon atoms with 10 attached hydrogen atoms. As carbon atoms are added to a molecular framework, the carbon chain can develop branches or form cyclic structures. A very common ring structure contains six carbon atoms in a ring, each bonded in a tetrahedral arrangement, as in the hydrocarbon cyclohexane, C6H12. Such ring structures are often very simply represented as regular polygons in which each apex represents a carbon atom, and the hydrogen atoms that complete the bonding requirements of the carbon atoms are not shown. The polygon convention for cyclic structures reveals concisely the bonding arrangement of the molecule but does not explicitly convey information about the actual three-dimensional architecture. It should be noted that the polygon is only a two-dimensional symbol for the three-dimensional molecule.
Under certain bonding conditions, adjacent atoms will form multiple bonds with each other. A double bond is formed when two atoms use two electron pairs to form two covalent bonds; a triple bond results when two atoms share three electron pairs to form three covalent bonds. Multiple bonds have special structural and electronic features that generate interesting chemical properties. The six atoms involved in a double bond (as in ethene, C2H4) lie in a single plane, with regions above and below the plane occupied by the electrons of the second covalent bond. Atoms in a triple bond (as in acetylene, or ethyne, C2H2) lie in a straight line, with four regions beside the bond axis occupied by electrons of the second and third covalent bonds.
Carl R. Noller Melvyn C. UsselmanFunctional groups
Click Here to see full-size table
Chemists observed early in the study of organic compounds that certain groups of atoms and associated bonds, known as functional groups, confer specific reactivity patterns on the molecules of which they are a part. Although the properties of each of the several million organic molecules whose structure is known are unique in some way, all molecules that contain the same functional group have a similar pattern of reactivity at the functional group site. Thus, functional groups are a key organizing feature of organic chemistry. By focusing on the functional groups present in a molecule (most molecules have more than one functional group), several of the reactions that the molecule will undergo can be predicted and understood.
Because carbon-to-carbon and carbon-to-hydrogen bonds are extremely strong and the charge of the electrons in these covalent bonds is spread more or less evenly over the bonded atoms, hydrocarbons that contain only single bonds of these two types are not very reactive. The reactivity of a molecule increases if it contains one or more weak bonds or bonds that have an unequal distribution of electrons between the two atoms. If the two electrons of a covalent bond are, for one reason or another, drawn more closely to one of the bonded atoms, that atom will develop a partial negative charge and the atom to which it is bonded will develop a partial positive charge. A covalent bond in which the electron pair linking the atoms is shared unequally is known as a polar bond. Polar bonds, and any other bonds that have unique electronic properties, confer the potential for chemical reaction on the molecule in which they are present. This is because, for every reaction, one or more bonds of a molecule must be broken and new bonds formed. The presence of a partial negative charge (a region of high electron density) will draw to itself other atoms or groups of atoms that are deficient in electron density. This initiates the process of bond breaking that is a prerequisite for a chemical reaction. For these reasons, molecules with regions of increased or decreased electron density are especially important for chemical change.
There are two major bonding features that generate the reactive sites of functional groups. The first, already mentioned, is the presence of multiple bonds. Both double and triple bonds have regions of high electron density lying outside the atom-to-atom bond axis. Double and triple bonds are known as functional groups, a term that is used to identify atoms or groups of atoms within a molecule that are sites of comparatively high reactivity. A second type of reactive site results when an atom other than carbon or hydrogen (termed a heteroatom) is bonded to carbon. All heteroatoms have a greater or lesser attraction for electrons than does carbon. Thus, each bond between a carbon and a heteroatom is polar, and the degree of polarity depends on the difference between the electron-attracting properties of the two atoms. The most important atomic groupings that contain such reactive polar bonds are also able to generate functional groups.
To emphasize the generality of reactions between molecules that contain the same functional group, chemists often represent the less reactive portions of a molecule by the symbol R. Thus, all molecules that contain a double bond, however complicated, can be represented by the general formula for an alkene—i.e.,
This type of formula suggests that the molecule will undergo those reactions that are common to double bonds and that the reaction will occur at the double bond. The rest of the molecule, represented by the four R groups, will remain unchanged by the reaction occurring at the functional group site.
Molecules with more than one functional group, called polyfunctional, may have more complicated properties that result from the identity—and interconnectedness—of the multiple functional groups. Many natural products contain several functional groups located at specific sites within a large, complicated, three-dimensional structure.
Alkanes
Alkanes are compounds that consist entirely of atoms of carbon and hydrogen (a class of substances known as hydrocarbons) joined to one another by single bonds. The shared electron pair in each of these single bonds occupies space directly between the two atoms; the bond generated by this shared pair is known as a sigma (σ) bond. Both carbon-carbon and carbon-hydrogen sigma bonds are single strong, nonpolar covalent bonds that are normally the least reactive bonds in organic molecules. Alkane sequences form the inert framework of most organic compounds. For this reason, alkanes are not formally considered a functional group. When a hydrocarbon chain is connected as a substituent to a more fundamental structural unit, it is termed an alkyl group. The simplest examples of alkanes are methane (CH4; the principal constituent of natural gas), ethane (C2H6), propane (C3H8; widely used as a barbecue fuel), and butane (C4H10; the liquid fuel in pocket lighters). Hydrocarbon chains commonly occur in cyclic forms, or rings; the most common example is cyclohexane (C6H12).
Alkenes
Organic compounds are termed alkenes if they contain a carbon-carbon double bond. The shared electron pair of one of the bonds is a σ bond. The second pair of electrons occupies space on both sides of the σ bond; this shared pair constitutes a pi (π) bond. A π bond forms a region of increased electron density because the electron pair is more distant from the positively charged carbon nuclei than is the electron pair of the σ bond . Even though a carbon-carbon double bond is very strong, a π bond will draw to itself atoms or atomic groupings that are electron-deficient, thereby initiating a process of bond-breaking that can lead to rupture of the π bond and formation of new σ bonds. A simple example of an alkene reaction, which illustrates the way in which the electronic properties of a functional group determine its reactivity, is the addition of molecular hydrogen to form alkanes, which contain only σ bonds.
Such reactions, in which the π bond of an alkene reacts to form two new σ bonds, are energetically favourable because the new bonds formed (two carbon-hydrogen σ bonds) are stronger than the bonds broken (one carbon-carbon π bond and one hydrogen-hydrogen σ bond). Because the addition of atoms to the π bond of alkenes to form new σ bonds is a general and characteristic reaction of alkenes, alkenes are said to be unsaturated. Alkanes, which cannot be transformed by addition reactions into molecules with a greater number of σ bonds, are said to be saturated.
The alkene functional group is an important one in chemistry and is widespread in nature. Some common examples (shown here) include ethylene (used to make polyethylene), 2-methyl-1,3-butadieneisoprene (used to make rubber), and vitamin A (essential for vision).
For ethene, both the carbon atoms of an alkene and the four atoms connected to the double bond lie in a single plane.
Alkynes
Molecules that contain a triple bond between two carbon atoms are known as alkynes. The triple bond is made up of one σ bond and two π bonds. As in alkenes, the π bonds constitute regions of increased electron density lying parallel to the carbon-carbon bond axis. Carbon-carbon triple bonds are very strong bonds, but reactions do occur that break the π bonds to form stronger σ bonds.
The most common example of an alkyne is ethyne (also known as acetylene), used as a fuel for oxyacetylene torches in welding applications. Alkynes are not abundant in nature, but the fungicide capillan contains two alkyne functional groups.
Aromatic hydrocarbons (arenes)
A distinctive set of physical and chemical properties is imparted to molecules that contain a functional group composed of three pairs of doubly bonded atoms (usually all carbon atoms) bonded together in the shape of a regular planar (flat) hexagon. The hexagonal ring is usually drawn with an alternating sequence of single and double bonds. The molecule benzene, C6H6, first discovered by English physicist and chemist Michael Faraday in 1825, is the smallest molecule that can contain this functional group, and arenes contain one or more benzene (or structurally similar) rings. Because benzene and many larger arenes have a strong odour, they have long been known as aromatic hydrocarbons. Benzene, and all the larger arenes, have a characteristic planar structure forced on them by the electronic requirements of the six (or more) pi electrons. When named as substituents on other structural units, the aromatic units are called aryl substituents. Naphthalene, the active component of mothballs, contains two fused benzene rings. Benzo[a]pyrene, an aromatic hydrocarbon produced in small amounts by the combustion of organic substances, contains five fused benzene rings. Like several other polycyclic aromatic hydrocarbons, it is carcinogenic. Aromatic compounds are widely distributed in nature. Benzaldehyde, anisole, and vanillin, for example, have pleasant aromas.
![Chemical Compound. Structural diagrams of benzen, naphthalene, benzo[a]pyrene, benzaldehyde, anisole, and vanillin.](https://cdn.britannica.com/77/16477-004-0C6A95B9/Chemical-Compound-diagrams-benzo-benzen-naphthalene-anisole.jpg)
Alcohols and phenols
An oxygen atom normally forms two σ bonds with other atoms; the water molecule, H2O, is the simplest and most common example. If one hydrogen atom is removed from a water molecule, a hydroxyl functional group (―OH) is generated. When a hydroxyl group is joined to an alkane framework, an alcohol such as ethanol, is produced.
When the hydroxyl group is joined to an aryl ring, a phenol results (shown above). Both alcohols and phenols are widespread in nature, with alcohols being especially ubiquitous. The hydroxyl group of alcohols and phenols is responsible for an interesting variety of physical and chemical properties. The biochemical action of vitamin E, for example, depends largely on the reactivity of the phenol functional group.
An oxygen atom is much more electronegative than carbon or hydrogen atoms, so both carbon-oxygen and hydrogen-oxygen bonds are polar. The oxygen atom is slightly negatively charged, and the carbon and hydrogen atoms are slightly positively charged. The polar bonds of the hydroxyl group are responsible for the major reaction characteristics of alcohols and phenols. In general, these reactions are initiated by reaction of electron-deficient groups with the negatively charged oxygen atom or by reaction of electron-rich groups with the positively charged atoms—namely, carbon or hydrogen—bonded to oxygen.
Ethers and epoxides
An organic molecule in which an oxygen atom is bonded to two carbon atoms through two sigma bonds is known as an ether. Ether molecules occur widely in nature. Diethyl ether was once widely used as an anesthetic. An aromatic ether known as Nerolin II (2-ethoxynaphthalene) is used in perfumes to impart the scent of orange blossoms. Cyclic ethers, such as tetrahydrofuran, are commonly used as organic solvents. Although ethers contain two polar carbon-oxygen bonds, they are much less reactive than alcohols or phenols.
Epoxides are cyclic ethers that contain a three-membered ring. The simplest example is oxirane (ethylene oxide). An epoxide is one of the functional groups in the insect hormone known as juvenile hormone.
Thiols
A thiol is structurally similar to an alcohol but contains a sulfur atom in place of the oxygen atom normally found in an alcohol. The outstanding feature of thiols is their foul smell. The simplest thiol is hydrogen sulfide, H2S, the sulfur analog of water. It can be detected by the human nose at a concentration of a few parts per billion and is readily identifiable as having a rotten-egg odour. Ethanethiol is added in trace amounts to natural gas to give it a detectable odour, and striped skunks deter predators by releasing a liquid spray containing 3-methyl-1-butanethiol. When present as a substituent on another structural unit, the SH group is commonly termed mercapto, as in 2-mercaptoethanol.
Amines
Amines are functional group compounds that contain at least one nitrogen atom bonded to hydrogen atoms or to alkyl or aryl groups. If the substituents (other than hydrogen atoms) are alkyl groups, the resulting compounds are termed alkyl amines. If one or more substituents is an aryl group, the compounds are termed aryl amines. Amines are commonly categorized as primary, secondary, or tertiary, depending on whether the nitrogen atom is bonded to one, two, or three alkyl or aryl groups, respectively. The nitrogen atom is bonded to its hydrogen atoms and alkyl groups by sigma (σ) bonds, but the nitrogen atom also bears a nonbonded electron pair. The three σ bonds and nonbonded electron pair are oriented around the nitrogen atom in a distorted tetrahedral geometry.
In some compounds, the nonbonded electron pair on the nitrogen atom is replaced by a fourth σ bond to a hydrogen atom or to an alkyl or aryl group. The resulting compound, called a quaternary ammonium salt, has a positive charge on the nitrogen atom and a tetrahedral arrangement of groups around the nitrogen atom. Amines are very common organic molecules, and many are physiologically active. Amphetamine, for example, is a central nervous system stimulant and acts as an antidepressant. Amines are particularly valuable because of their ability to act as bases, a property that is a consequence of the ability of amines to accept hydrogen atoms from acidic molecules.
Halides
Halides, or organohalides, are compounds that contain a halogen atom (fluorine, chlorine, bromine, or iodine) bonded to a carbon atom by a polar bond. The slightly positive charge that exists on the carbon atom in carbon-halogen bonds is the source of reactivity of halides. A wide variety of organohalides have been discovered in marine organisms, and several simple halide compounds have important commercial applications. Chloroethane (ethyl chloride) is a volatile liquid that is used as a topical anesthetic. Chloroethene (vinyl chloride) is the monomeric building block for polyvinyl chloride (PVC), and the mixed organohalide halothane is an inhalation anesthetic. The compound epibatidine, isolated from glands on the back of an Ecuadorian poison frog, has been found to be an especially potent painkiller.
Aldehydes and ketones
When an oxygen atom forms a double bond to a carbon atom, a carbonyl functional group is obtained. The carbon atom of a carbonyl group is bonded to two other atoms in addition to the oxygen atom. A wide range of functional groups are produced by the presence of different atomic groupings on the carbon of the carbonyl group. Two of the most important are aldehydes and ketones. In a ketone, both atoms bonded to the carbonyl carbon are other carbon atoms, and, in an aldehyde, at least one atom on the carbonyl carbon is a hydrogen. Similar to the double bond of alkenes, the carbon-oxygen double bond is made up of a σ bond, whose electron pair lies between the bonded atoms, and a π bond, whose electron pair occupies space on both sides of the σ bond.
Many aldehydes and ketones have pleasant, fruity aromas, and these compounds are frequently responsible for the flavour and smell of fruits and vegetables. A 40 percent solution of formaldehyde in water is formalin, a liquid used for preserving biological specimens. Benzaldehyde is an aromatic aldehyde and imparts much of the aroma to cherries and almonds. Butanedione, a ketone with two carbonyl groups, is partially responsible for the odour of cheeses. Civetone, a large cyclic ketone, is secreted by the civet cat and is a key component of many expensive perfumes.
The carbonyl group has a wide variety of reaction pathways open to it. Because of its π bond, the carbonyl group undergoes addition reactions similar to those that occur with alkenes but with a few important differences. Whereas carbon-carbon double bonds are nonpolar, carbon-oxygen double bonds are polar. Species that add to a carbonyl group to form new σ bonds react in such a way that electrophilic (electron-seeking) groups attack the oxygen atom and nucleophilic groups (those seeking positively charged centres) attack the carbon atom. Furthermore, addition to a carbonyl group results in the breaking of a strong π bond. The energy relationships of carbonyl addition reactions are consequently very different from those of alkene addition reactions. Other reaction possibilities of carbonyl compounds depend on the nature of the atomic groupings, termed substituents, attached to the carbonyl carbon. When both substituents are unreactive alkane fragments, as in ketones, there are few reactions other than carbonyl additions. When one of the substituents is not an alkane fragment, different possibilities emerge. In aldehydes, the carbonyl carbon is bonded to a hydrogen atom, and reactions that involve this hydrogen atom distinguish the reactions of aldehydes from those of ketones.
Carboxylic acids
The conjunction of a carbonyl and a hydroxyl group forms a functional group known as a carboxyl group.
The hydrogen of a carboxyl group can be removed (to form a negatively charged carboxylate ion), and thus molecules containing the carboxyl group have acidic properties and are generally known as carboxylic acids. Vinegar is a 5 percent solution of acetic acid in water, and its sharp acidic taste is due to the carboxylic acid present. Lactic acid provides much of the sour taste of pickles and sauerkraut and is produced by contracting muscles. Citric acid is a major flavour component of citrus fruits, such as lemons, grapefruits, and oranges. Ibuprofen, an effective analgesic and anti-inflammatory agent, contains a carboxyl group.
The structural unit containing an alkyl group bonded to a carbonyl group is known as an acyl group. A family of functional groups, known as carboxylic acid derivatives, contains the acyl group bonded to different substituents.
Esters have an alkoxy (OR) fragment attached to the acyl group; amides have attached amino groups (―NR2); acyl halides have an attached chlorine or bromine atom; and anhydrides have an attached carboxyl group. Each type of acid derivative has a set of characteristic reactions that qualifies it as a unique functional group, but all acid derivatives can be readily converted to a carboxylic acid under appropriate reaction conditions. Many simple esters are responsible for the pleasant odours of fruits and flowers. Methyl butanoate, for example, is present in pineapples. Urea, the major organic constituent of urine and a widely used fertilizer, is a double amide of carbonic acid. Acyl chlorides and anhydrides are the most reactive carboxylic acid derivatives and are useful chemical reagents, although they are not important functional groups in natural substances.
Polyfunctional compounds
Although each of the functional groups introduced above has a characteristic set of favoured reactions, it is not always possible to predict the properties of organic compounds that contain several different functional groups. In polyfunctional organic compounds, the functional groups often interact with one another to impart unique reactivity patterns to the compounds. As chemistry evolves as a science, it becomes possible to understand more of the behaviour of complex molecules, and chemists are able to design laboratory syntheses of increasingly complicated molecules, basing the synthetic plan upon the reactivity trends of functional groups.
Melvyn C. Usselman