Obtaining disease-resistant plants
Several means of obtaining disease-resistant plants are commonly employed alone or in combination. These include introduction from an outside source, selection, and induced variation. All three may be used at different stages in a continuous process; for example, varieties free from injurious insects or plant diseases may be introduced for comparison with local varieties. The more promising lines or strains are then selected for further propagation, and they are further improved by promoting as much variation as possible through hybridization or special treatment. Finally, selection of the plants showing greatest promise takes place. Developing disease-resistant plants is a continuing process.
Special treatments for inducing gene changes include the application of mutation-inducing chemicals and irradiation with ultraviolet light and X-rays. These treatments commonly induce deleterious genetic changes, but, occasionally, beneficial ones also may occur.
Methods used in breeding plants for disease resistance are similar to those used in breeding for other characters except that two organisms are involved—the host plant and the pathogen. Thus, it is necessary to know as much as possible about the nature of inheritance of the resistant characters in the host plant and the existence of physiological races or strains of the pathogen.
The use of genetic engineering in developing disease-resistant plants
The techniques of genetic engineering can be used to manipulate the genetic material of a cell in order to produce a new characteristic in an organism. Genes from plants, microbes, and animals can be recombined (recombinant DNA) and introduced into the living cells of any of these organisms.
Genetically modified organisms that have had genes from other species inserted into their genome (the full complement of an organism’s genes) are called transgenic. The production of pathogen-resistant transgenic plants has been achieved by this method; certain genes are inserted into the plant’s genome that confer resistance to such pathogens as viruses, fungi, and insects. Transgenic plants that are tolerant to herbicides and that show improvements in other qualities also have been developed.
Apprehension about the release of transgenic plants into the environment exists, and measures to safeguard the application of this technology have been adopted. In the United States several federal agencies, such as the U.S. Department of Agriculture, the Food and Drug Administration, and the Environmental Protection Agency, regulate the use of genetically engineered organisms. As of 2016, more than 457 million acres (185 million hectares) worldwide were planted with genetically modified (GM) crops. Among the most successful GM crops are corn (maize), soybeans, and cotton, all of which have proved valuable to farmers with respect to producing increased yields and having economic advantages.
Classification of plant diseases by causal agent
Plant diseases are often classified by their physiological effects or symptoms. Many diseases, however, produce practically identical symptoms and signs but are caused by very different microorganisms or agents, thus requiring completely different control methods. Classification according to symptoms is also inadequate because a causal agent may induce several different symptoms, even on the same plant organ, which often intergrade. Classification may be according to the species of plant affected. Host indexes (lists of diseases known to occur on certain hosts in regions, countries, or continents) are valuable in diagnosis. When an apparently new disease is found on a known host, a check into the index for the specific host often leads to identification of the causal agent. It is also possible to classify diseases according to the essential process or function that is adversely affected. The best and most widely used classification of plant diseases is based on the causal agent, such as a noninfectious agent or an infectious agent (i.e., a virus, viroid, mycoplasma, bacterium, fungus, nematode, or parasitic flowering plant).
Noninfectious disease-causing agents
Noninfectious diseases, which sometimes arise very suddenly, are caused by the excess, deficiency, nonavailability, or improper balance of light, air circulation, relative humidity, water, or essential soil elements; unfavourable soil moisture-oxygen relations; extremes in soil acidity or alkalinity; high or low temperatures; pesticide injury; other poisonous chemicals in air or soil; changes in soil grade; girdling of roots; mechanical and electrical agents; and soil compaction. In addition, unfavourable preharvest and storage conditions for fruits, vegetables, and nursery stock often result in losses. The effects of noninfectious diseases can be seen on a variety of plant species growing in a given locality or environment. Many diseases and injuries caused by noninfectious agents result in heavy loss but are difficult to check or eliminate because they frequently reflect ecological factors beyond human control. Symptoms may appear several weeks or months after an environmental disturbance.
Injuries incurred from accidents, poisons, or adverse environmental disturbances often result in damaged tissues that weaken a plant, enabling bacteria, fungi, or viruses to enter and add further damage. The cause may be obvious (lightning or hail), but often it is obscure. Symptoms alone are often unreliable in identifying the causal factor. A thorough examination of recent weather patterns, the condition of surrounding plants, cultural treatments or disturbances, and soil and water tests can help reveal the nature of the disease.
Adverse environment
High temperatures may scald corn, cotton, and bean leaves and may induce formation of cankers at the soil surface of tender flax, cotton, and peanut plants. Frost injury is relatively common, but temperatures just above freezing also may cause damage, such as net necrosis (localized tissue death) in potato tubers and “silvering” of corn leaves. Isolated, thin-barked trees growing in northern climates and subjected to frequent thawing by day and freezing by night may develop dead bark cankers or vertical frost cracks on the south or southwest sides of the trunk. Alternate freezing and thawing, heaving, low air moisture, and smothering under an ice-sheet cover are damaging to alfalfa, clovers, strawberries, and grass on golf greens. Legume crowns commonly split under these conditions and are invaded by decay-forming fungi.
The drought and dry winds that often accompany high temperatures cause stunting, wilting, blasting, marginal scorching of leaves, and dieback of shoots. Leaf scorch is common on trees in exposed locations following hot, dry, windy weather when water is lost from leaves faster than it is absorbed by roots. Leaf scorch and sudden flower drop are common indoor plant problems because the humidity in a home, an apartment, or an office is usually below 30 percent. Similar symptoms are caused by a change in soil grade, an altered water-table level, a compacted and shallow soil, paved surface over tree roots, temporary flooding or a waterlogged (oxygen-deficient) soil, girdling tree roots, salt spray near the ocean, and an injured or diseased root system. Injured plants are often very susceptible to air and soil pathogens and secondary invaders.
Blossom-end rot of tomato and pepper is prevalent when soil moisture and temperature levels fluctuate widely and calcium is low.
Poor aeration may cause blackheart in stored potatoes. Accumulation of certain gases from the respiration of apples in storage may produce apple scald and other disorders.
All plants require certain mineral elements to develop and mature in a healthy state. Macronutrients such as nitrogen, potassium, phosphorus, sulfur, calcium, and magnesium are required in substantial quantities, while micronutrients or trace elements such as boron, iron, manganese, copper, zinc, and molybdenum are needed in much smaller quantities. When the supply of any essential nutrient falls below the level required by the plant, a deficiency occurs, leading to symptoms that include stunting of plants; scorching or malformation of leaves; abnormal coloration; premature leaf, bud, and flower drop; delayed maturity or failure of flower and fruit buds to develop; and dieback of shoots.
Symptoms of nutrient deficiencies vary depending on the nutrients involved, the stage of plant growth, soil moisture, and other factors; they often resemble symptoms caused by infectious agents such as bacteria or viruses.
The availability of water may affect nutrient uptake by the plant. Blossom-end rot of tomato, a disease associated with a deficiency of calcium, may occur if the water supply is irregular, even if an adequate amount of calcium is in the soil. This discontinuity in availability of water will inhibit uptake of the calcium in a quantity sufficient to nourish a fast-growing tomato plant. Necrosis at the blossom end of the fruit results. This situation generally disappears when water conditions improve.
Excess minerals can damage plants either directly, causing stunting, deformities, or dieback, or indirectly by interfering with the absorption and use of other nutrients, resulting in subsequent deficiency symptoms. A superabundance of nitrogen, for example, may cause deficiency symptoms of potassium, zinc, or other nutrient elements; a lack of or delay in flower and fruit development; and a predisposition to winter injury. If potassium is high, calcium and magnesium deficiencies may occur.
The pH of a soil has a dramatic impact on nutrient availability to plants. Most plants will grow in a soil with a pH between 4.0 and 8.0. In acidic soils some nutrients are far more available and may reach concentrations that are toxic or that inhibit absorption of other nutrients, while other minerals become chemically bound and unavailable to plants. A similar situation exists in alkaline soils, although different minerals are affected. Oats planted in alkaline soils that actually contain a sufficient amount of manganese may develop the manganese-deficiency disease gray speck. This occurs because an elevated soil pH causes manganese to react with oxygen to produce manganese dioxide, a form of the nutrient that is insoluble to plants.
An excess of water-soluble salts is a common problem with houseplants. Salt concentrations may build up as a whitish crust on soil and container surfaces of potted plants following normal evaporation of water over a period of time. Symptoms include leaf scorching, bronzing, yellowing and stunting, and wilting, plus root and shoot dieback. Damage from soluble salts is also common in arid regions and in regions where ice-control chemicals are applied heavily.
Several nonparasitic diseases (e.g., oat blast, weakneck of sorghum, straighthead of rice, and crazy-top of cotton) are caused by combinations of environmental factors—e.g., high temperatures, moisture stress or poor irrigation practices, imbalance of mineral nutrients, and reduced light.
Environmental disturbances alter the normal physiology of the plant, activity of pathogens, and host-pathogen interactions.