Intensity and magnitude of earthquakes

Intensity scales

The violence of seismic shaking varies considerably over a single affected area. Because the entire range of observed effects is not capable of simple quantitative definition, the strength of the shaking is commonly estimated by reference to intensity scales that describe the effects in qualitative terms. Intensity scales date from the late 19th and early 20th centuries, before seismographs capable of accurate measurement of ground motion were developed. Since that time, the divisions in these scales have been associated with measurable accelerations of the local ground shaking. Intensity depends, however, in a complicated way not only on ground accelerations but also on the periods and other features of seismic waves, the distance of the measuring point from the source, and the local geologic structure. Furthermore, earthquake intensity, or strength, is distinct from earthquake magnitude, which is a measure of the amplitude, or size, of seismic waves as specified by a seismograph reading. See below Earthquake magnitude.

A number of different intensity scales have been set up during the past century and applied to both current and ancient destructive earthquakes. For many years the most widely used was a 10-point scale devised in 1878 by Michele Stefano de Rossi and Franƈois-Alphonse Forel. The scale now generally employed in North America is the Mercalli scale, as modified by Harry O. Wood and Frank Neumann in 1931, in which intensity is considered to be more suitably graded. A 12-point abridged form of the modified Mercalli scale is provided below. Modified Mercalli intensity VIII is roughly correlated with peak accelerations of about one-quarter that of gravity (g = 9.8 metres, or 32.2 feet, per second squared) and ground velocities of 20 cm (8 inches) per second. Alternative scales have been developed in both Japan and Europe for local conditions. The European (MSK) scale of 12 grades is similar to the abridged version of the Mercalli.

Modified Mercalli scale of earthquake intensity
  • I. Not felt. Marginal and long-period effects of large earthquakes.
  • II. Felt by persons at rest, on upper floors, or otherwise favourably placed to sense tremors.
  • III. Felt indoors. Hanging objects swing. Vibrations are similar to those caused by the passing of light trucks. Duration can be estimated.
  • IV. Vibrations are similar to those caused by the passing of heavy trucks (or a jolt similar to that caused by a heavy ball striking the walls). Standing automobiles rock. Windows, dishes, doors rattle. Glasses clink, crockery clashes. In the upper range of grade IV, wooden walls and frames creak.
  • V. Felt outdoors; direction may be estimated. Sleepers awaken. Liquids are disturbed, some spilled. Small objects are displaced or upset. Doors swing, open, close. Pendulum clocks stop, start, change rate.
  • VI. Felt by all; many are frightened and run outdoors. Persons walk unsteadily. Pictures fall off walls. Furniture moves or overturns. Weak plaster and masonry cracks. Small bells ring (church, school). Trees, bushes shake.
  • VII. Difficult to stand. Noticed by drivers of automobiles. Hanging objects quivering. Furniture broken. Damage to weak masonry. Weak chimneys broken at roof line. Fall of plaster, loose bricks, stones, tiles, cornices. Waves on ponds; water turbid with mud. Small slides and caving along sand or gravel banks. Large bells ringing. Concrete irrigation ditches damaged.
  • VIII. Steering of automobiles affected. Damage to masonry; partial collapse. Some damage to reinforced masonry; none to reinforced masonry designed to resist lateral forces. Fall of stucco and some masonry walls. Twisting, fall of chimneys, factory stacks, monuments, towers, elevated tanks. Frame houses moved on foundations if not bolted down; loose panel walls thrown out. Decayed pilings broken off. Branches broken from trees. Changes in flow or temperature of springs and wells. Cracks in wet ground and on steep slopes.
  • IX. General panic. Weak masonry destroyed; ordinary masonry heavily damaged, sometimes with complete collapse; reinforced masonry seriously damaged. Serious damage to reservoirs. Underground pipes broken. Conspicuous cracks in ground. In alluvial areas, sand and mud ejected; earthquake fountains, sand craters.
  • X. Most masonry and frame structures destroyed with their foundations. Some well-built wooden structures and bridges destroyed. Serious damage to dams, dikes, embankments. Large landslides. Water thrown on banks of canals, rivers, lakes, and so on. Sand and mud shifted horizontally on beaches and flat land. Railway rails bent slightly.
  • XI. Rails bent greatly. Underground pipelines completely out of service.
  • XII. Damage nearly total. Large rock masses displaced. Lines of sight and level distorted. Objects thrown into air.

With the use of an intensity scale, it is possible to summarize such data for an earthquake by constructing isoseismal curves, which are lines that connect points of equal intensity. If there were complete symmetry about the vertical through the earthquake’s focus, isoseismals would be circles with the epicentre (the point at the surface of the Earth immediately above where the earthquake originated) as the centre. However, because of the many unsymmetrical geologic factors influencing intensity, the curves are often far from circular. The most probable position of the epicentre is often assumed to be at a point inside the area of highest intensity. In some cases, instrumental data verify this calculation, but not infrequently the true epicentre lies outside the area of greatest intensity.