Thin-film interference
Observable interference effects are not limited to the double-slit geometry used by Thomas Young. The phenomenon of thin-film interference results whenever light reflects off two surfaces separated by a distance comparable to its wavelength. The “film” between the surfaces can be a vacuum, air, or any transparent liquid or solid. In visible light, noticeable interference effects are restricted to films with thicknesses on the order of a few micrometres. A familiar example is the film of a soap bubble. Light reflected from a bubble is a superposition of two waves—one reflecting off the front surface and a second reflecting off the back surface. The two reflected waves overlap in space and interfere. Depending on the thickness of the soap film, the two waves may interfere constructively or destructively. A full analysis shows that, for light of a single wavelength λ, there are constructive interference for film thicknesses equal to λ/4, 3λ/4, 5λ/4,… and destructive interference for thicknesses equal to λ/2, λ, 3λ/2,….
When white light illuminates a soap film, bright bands of colour are observed as different wavelengths suffer destructive interference and are removed from the reflection. The remaining reflected light appears as the complementary colour of the removed wavelength (e.g., if red light is removed by destructive interference, the reflected light will appear as cyan). Thin films of oil on water produce a similar effect. In nature, the feathers of certain birds, including peacocks and hummingbirds, and the shells of some beetles display iridescence, in which the colour on reflection changes with the viewing angle. This is caused by the interference of reflected light waves from thinly layered structures or regular arrays of reflecting rods. In a similar fashion, pearls and abalone shells are iridescent from the interference caused by reflections from multiple layers of nacre. Gemstones such as opal exhibit beautiful interference effects arising from the scattering of light from regular patterns of microscopic spherical particles.
There are many technological applications of interference effects in light. Common antireflection coatings on camera lenses are thin films with thicknesses and indices of refraction chosen to produce destructive interference on reflection for visible light. More-specialized coatings, consisting of multiple layers of thin films, are designed to transmit light only within a narrow range of wavelengths and thus act as wavelength filters. Multilayer coatings are also used to enhance the reflectivity of mirrors in astronomical telescopes and in the optical cavities of lasers. The precision techniques of interferometry measure small changes in relative distances by monitoring the fringe shifts in the interference patterns of reflected light. For example, the curvatures of surfaces in optical components are monitored to fractions of an optical wavelength with interferometric methods.
Diffraction
The subtle pattern of light and dark fringes seen in the geometrical shadow when light passes an obstacle, first observed by the Jesuit mathematician Francesco Grimaldi in the 17th century, is an example of the wave phenomenon of diffraction. Diffraction is a product of the superposition of waves—it is an interference effect. Whenever a wave is obstructed, those portions of the wave not affected by the obstruction interfere with one another in the region of space beyond the obstruction. The mathematics of diffraction is considerably complicated, and a detailed, systematic theory was not worked out until 1818 by the French physicist Augustin-Jean Fresnel.
The Dutch scientist Christiaan Huygens first stated the fundamental principle for understanding diffraction: every point on a wave front can be considered a secondary source of spherical wavelets. The shape of the advancing wave front is determined by the envelope of the overlapping spherical wavelets. If the wave is unobstructed, Huygens’s principle will not be needed for determining its evolution—the rules of geometrical optics will suffice. (However, note that the light rays of geometrical optics are always perpendicular to the advancing wavefront; in this sense, the progress of a light ray is ultimately always determined by Huygens’s principle.) Huygens’s principle becomes necessary when a wave meets an obstacle or an aperture in an otherwise opaque surface. Thus, for a plane wave passing through a small aperture, only wavelets originating within the aperture contribute to the transmitted wave, which is seen to spread into the region of the aperture’s geometric shadow.
Fresnel incorporated Young’s principle of interference into Huygens’s construction and calculated the detailed intensity patterns produced by interfering secondary wavelets. For a viewing screen a distance L from a slit of width a, light of wavelength λ produces a central intensity maximum that is approximately λL/a in width. This result highlights the most important qualitative feature of diffraction: the effect is normally apparent only when the sizes of obstacles or apertures are on the order of the wavelength of the wave. For example, audible sound waves have wavelengths of about one metre, which easily diffract around commonplace objects. This is why sound is heard around corners. On the other hand, visible light has wavelengths of a fraction of a micrometre, and it therefore does not noticeably bend around large objects. Only the most careful measurements by Young, Fresnel, and their early 19th-century contemporaries revealed the details of the diffraction of visible light.